Zoo Med Paludarium Aquarium Heater 100W

Powerful Submersible Heater for Larger Paludarium and Aquatic Turtle Habitats

The Zoo Med Paludarium Aquarium Heater 100W delivers consistent, preset warmth for larger aquatic reptile environments. Designed for paludarium habitats, this 100-watt heater maintains a stable 78 degrees F (26 degrees C) without any manual temperature adjustments required - simply attach, submerge, and plug in.

Setup is straightforward: mount the heater to the inside wall of your turtle enclosure using the included suction cups, fully submerge it in water, and plug it in. Within 1 to 3 hours, your water reaches the target temperature. Positioning the heater near the filter outlet maximizes warm water circulation throughout the habitat.

A built-in automatic safety shut-off activates immediately if the heater is removed from water, protecting both your reptiles and your equipment. This makes it a dependable, low-maintenance heating solution for aquatic turtle keepers and paludarium enthusiasts managing larger setups.

Key Benefits

• Preset to 78 degrees F (26 degrees C) - no manual calibration needed
• 100 watts of heating power for larger paludarium water volumes
• Automatic safety shut-off if removed from water
• Includes suction cups for secure side or back wall mounting
• Improves water temperature consistency when placed near filter outlet
• Simple plug-and-heat setup - ideal for beginner and experienced reptile keepers

Why Reptile Owners Choose It

Aquatic turtle keepers and paludarium hobbyists managing larger enclosures value the Zoo Med 100W Paludarium Heater for its no-fuss preset design. There is no guesswork involved - plug it in and it maintains the target temperature automatically. The automatic safety shut-off adds peace of mind, especially in habitats where water levels can fluctuate. It integrates naturally into paludarium setups where reliable, stable water temperature is essential for reptile comfort and wellbeing.

Quick Product Snapshot

Material and Design Breakdown

The heater is built for full submersion inside aquatic reptile enclosures. The included suction cups allow secure mounting on the side or back wall of the habitat, keeping the unit stable and properly positioned during operation. Placing the heater near the filter outlet maximizes warm water distribution, ensuring even temperature throughout the enclosure. The preset design eliminates the need for external thermostats or manual adjustments for standard paludarium setups.

Setup and Compatibility Guidance

This heater is designed for paludarium habitats. Mount on the side or back wall using the enclosed suction cups. Fully submerge the heater before plugging into an electrical outlet - the safety shut-off will activate if the unit is not submerged. Allow 1 to 3 hours for the water to reach the target temperature of 78 degrees F. For best results, position near the filter outlet to improve warm water circulation throughout the habitat.

Care and Maintenance

Ensure the heater remains fully submerged during operation. Do not plug in or operate the heater outside of water. Monitor water levels regularly to prevent the safety shut-off from activating unintentionally. Wipe the exterior clean as needed when performing routine habitat maintenance.

Ideal for Reptile Keepers Who...

• Maintain larger paludarium setups or aquatic turtle habitats requiring more heating power
• Prefer a preset, plug-and-heat solution without manual temperature calibration
• Want a heater with a built-in safety shut-off for added protection
• Are setting up a new paludarium and need a reliable, high-wattage heating option
• Value low-maintenance equipment that integrates easily into existing filtration setups

FAQ

What temperature does this heater maintain?
The Zoo Med Paludarium Heater 100W is preset to maintain 78 degrees F (26 degrees C). No manual adjustment is required.

How do I install the heater?
Attach the heater to the inside wall of your enclosure using the included suction cups. Mount on the side or back wall, fully submerge in water, then plug into an electrical outlet. Allow 1 to 3 hours for the water to reach the target temperature.

Does this heater have a safety feature?
Yes. The heater includes an automatic safety shut-off that activates if the unit is removed from water, protecting your habitat and equipment.

How is the 100W different from the 25W version?
The 100W version provides significantly more heating power, making it suitable for larger paludarium water volumes compared to the 25W model.

Where should I position the heater for best results?
Place the heater near the filter outlet to improve circulation of warm water throughout the habitat.

Product Highlights

• 100-watt preset heater for paludarium and aquatic turtle habitats
• Maintains 78 degrees F (26 degrees C) without manual calibration
• Automatic safety shut-off if removed from water
• Suction cup mounting for side or back wall installation
• Simple plug-and-heat setup with no thermostat required
• Ideal for larger paludarium water volumes

Product Specifications